Innovacorp is a manufacturer, exporter, and supplier of hospital disinfectants in Tamil Nadu. Our range covers surface disinfectants, instrument disinfectants, hand rubs, and fumigation agents for multi-specialty hospitals, clinics, and diagnostic labs in Chennai, Coimbatore, and across the state.

Why Disinfection Protocol Matters in a Hospital

Infection-control teams in Tamil Nadu hospitals work with a fixed set of surfaces, contact times, and dilution ratios. A surface disinfectant that is under-dosed, or used beyond its contact time, does not do its job. A hand rub that is harsh on skin gets skipped by staff.

Choosing a disinfectant is less about the label and more about whether your team will actually use it correctly, shift after shift. That is the question we help hospitals answer.

Where Our Hospital Range Is Used

Our grades map to the routine disinfection points in a hospital. Here is where each one fits:

• OT and ICU surfaces: high-touch surfaces, trolleys, and equipment housings between cases.
• Ward and OPD surfaces: beds, side tables, door handles, and nursing station counters.
• Instrument disinfection: pre-cleaning and disinfection of surgical tools and endoscopes, as part of your reprocessing cycle.
• Fumigation and fogging: terminal cleaning of OTs and isolation rooms as per hospital protocol.
• Hand hygiene: hand rubs at ward entry points, ICU bays, and diagnostic counters.

Types We Manufacture, Export & Supply in Tamil Nadu

We keep the range narrow on purpose. Each grade is built for a specific surface or instrument, so your team does not have to guess which drum goes where.

• Surface disinfectants: for high-touch surfaces in wards, OPDs, and ICUs.
• Instrument disinfectants: for surgical tools and endoscope reprocessing, used as per your hospital's disinfection protocol.
• Fumigation agents: for OT terminal cleaning and isolation room fogging.
• Hand rubs and antiseptics: for clinical hand antisepsis.

Specification

Property	Typical Value
Appearance	Clear liquid (grade dependent)
pH (as supplied)	5.5–7.5 (surface and hand grades)
Active content	Grade dependent — TDS on request
Density	0.98–1.05 g/cm³
Contact time	As per TDS for each grade
Shelf life	12 months in unopened container

Final specification is confirmed after a review of your disinfection protocol and surface types.

Application and Dosage

Dosing and contact time vary by grade and by the surface or instrument being treated. A few working ranges:

• Surface disinfectants: 1:50 to 1:100 dilution, contact time 5–10 minutes.
• Instrument grades: used as per your hospital's reprocessing protocol.
• Hand rubs: used undiluted at point of care.

Final dilution and contact time are confirmed with your infection-control team, after a walk-through of the ward.

Packing

We supply in four pack sizes, so central stores and ward-level use are both covered:

• 5 L can — ward-level daily use
• 20 L can — ward or OPD top-up
• 50 L can — central store
• 200 L HDPE drum — bulk consumption

Key Benefits

The reason hospitals move to our range is not one big feature. It is small things that add up over a shift:

• Surface-appropriate grades: separate surface, instrument, and hand grades, so the team uses the right product at each station.
• Documented contact time: the TDS states contact time for each grade, so your SOP can be built around it.
• Material compatibility: grades available for stainless steel and common hospital surfaces. Test on a small area first.
• Packing for ward-level use: 5 L and 20 L cans for daily ward use; 50 L and 200 L drums for central stores.
• Documentation: TDS and MSDS available for each grade on request.

Technical Support

We work with infection-control and housekeeping teams to map each grade to the surface, instrument, and contact time in your protocol.

Share your SOP and surface list. We will recommend grades and dilutions for a trial in one ward before you roll out across the hospital.

Frequently Asked Questions

Who manufactures and supplies hospital disinfectants in Tamil Nadu?

Innovacorp manufactures, exports and supplies hospital disinfectants in Tamil Nadu for OTs, wards and surgical areas. Grades differ in active content, contact time and surface compatibility — share your requirement and we will confirm the grade.

Are your disinfectants suitable for OT environments in Tamil Nadu hospitals?

Our hospital range includes surface disinfectants formulated for OT, ICU and ward use. Technical data sheets and safety data sheets are available on request so your infection-control team can review the formulation before use. Final suitability is confirmed after a walk-through of your facility.

Do you supply hospital disinfectants in bulk to Tamil Nadu hospitals?

Yes. We supply in 5 L, 20 L and 50 L cans, and 200 L drums for larger consumption. Delivery schedules for Tamil Nadu hospitals and clinics are coordinated based on consumption.

Do you ship hospital disinfectants outside Tamil Nadu?

Yes. We supply across India and to selected export markets. Packing options and delivery timelines depend on the grade and quantity — call +91-9312871070 to confirm.

For TDS, MSDS and a quote, call +91-9312871070.