Manufacturers, Exporters, Suppliers of Paper Chemicals in Gurgaon

Innovacorp is a manufacturer, exporter, and supplier of paper chemicals to mills in Gurgaon and across Haryana — AKD sizing agents, rosin sizes, retention and drainage aids, dry strength resins, defoamers, and biocides. Gurgaon's paper and packaging base runs on a mix of recycled furnish, agricultural residue, and virgin pulp, and the chemistry that works on one machine rarely works unchanged on the next. That is why we treat paper chemicals as a machine-specific program, not a catalogue item.

Why Paper Chemistry Matters on a Gurgaon Paper Machine

A paper machine runs on a narrow balance: fiber, filler, water, and chemistry. Push retention too high and the sheet formation suffers. Push drainage too fast and you lose fines to the white water. Skip sizing and the sheet fails the water resistance test. Anyone who has run a machine on high-recycled furnish knows that the wet-end is where most runnability problems start, and where most of them are solved. The right wet-end chemistry supports machine speed, sheet strength, and consistent optical properties at the same time.

Where Our Paper Chemicals Are Used in Gurgaon

• Stock preparation: retention aids and drainage aids at the fan pump and headbox approach.
• Wet-end: AKD and rosin sizing, dry strength resins, and charge control chemistry.
• Pulping and bleaching: surfactants and bleaching aids for lignin removal and brightness development.
• Process control: defoamers for stock and white water, biocides for slime control in the short loop.
• Coating and surface treatment: surface sizing and coating binders where the grade requires it.
• Packaging and board: sizing and strength chemistry for corrugated box and packaging grades produced in Gurgaon's industrial belt.

Types We Manufacture, Export & Supply in Gurgaon

• AKD sizing agents: reactive sizing for neutral and alkaline papermaking — designed for water resistance and ink holdout.
• Rosin sizing agents: for acidic papermaking grades where alum-rosin chemistry is standard.
• Retention and drainage aids: polyacrylamide-based single and dual systems for fine retention and faster drainage.
• Dry strength resins: for tensile, burst, and internal bond improvement across packaging and writing grades.
• Wet strength resins: for grades that need strength when wet — tissue, packaging, and specialty grades.
• Defoamers and biocides: for stock and white water foam control and slime control in the short loop.

Specifications

Property	Typical Value
Appearance	Liquid or emulsion (grade dependent)
Active content	Grade dependent; confirmed on TDS
pH (as supplied)	Grade dependent
Ionic character	Anionic / cationic / non-ionic (grade dependent)
Solubility / dispersibility	Per TDS for each grade
Shelf life	6–12 months in unopened original packing (grade dependent)

Final specification is confirmed after a machine trial against your furnish and paper grade.

Application and Dosage

Dosage depends on furnish, machine configuration, paper grade, and the specific chemistry. Typical starting points:

• AKD sizing: 1–3 kg per tonne of paper, dosed at the fan pump or headbox approach.
• Rosin sizing: 5–15 kg per tonne of paper with alum, adjusted to pH.
• Retention aids: 0.2–1.0 kg per tonne of paper, dosed at the fan pump or before the headbox.
• Dry strength resins: 3–10 kg per tonne of paper, dosed in the stock approach.
• Defoamers: 0.1–0.5 kg per tonne of paper, dosed where foam builds up.

These are starting points only. Final dose is set on a machine trial with your process team.

Packing

• 50 L HDPE drums
• 200 L HDPE drums
• 1000 L IBC tanks

Key Benefits

• Supports fine retention and filler retention, which helps reduce fiber loss to the white water.
• Designed to support drainage on high-speed machines, which helps with machine runnability.
• AKD and rosin grades available to match your papermaking pH and furnish.
• Dry and wet strength resins for packaging, writing, and specialty grades.
• Defoamers and biocides for stock and white-water foam and slime control.

Technical Support in Gurgaon

Paper chemistry is a machine decision. The right retention aid depends on your furnish, your machine speed, and your white-water closure. The right sizing depends on your pH and your paper grade. We work with your process and quality team on machine trials, dosage optimisation, and troubleshooting at the wet-end. Support is available across Gurgaon and the surrounding Haryana paper clusters.

Frequently Asked Questions

1. What types of paper chemicals do you supply in Gurgaon?

We manufacture, export and supply AKD sizing agents, rosin sizes, retention and drainage aids, dry and wet strength resins, defoamers, and deinking agents to paper and board mills in Gurgaon and across Haryana. The right grade depends on your furnish, machine configuration, and target paper properties.

2. Where can I find AKD sizing agents in Gurgaon for paper mills?

We manufacture and supply AKD sizing agents from our production facility for paper mills in Gurgaon and NCR. AKD is designed for water resistance and printability. The right grade depends on the furnish and paper grade, and is confirmed with your process team.

3. How do retention aids help Gurgaon paper mills reduce costs?

Retention aids are designed to help fine fibers and fillers stay in the sheet rather than leaving with the white water. This supports better fiber utilisation and cleaner white water systems. The right chemistry depends on the furnish and the machine.

4. Do you provide technical support for paper mills in Gurgaon?

Yes. We support paper and board mills in Gurgaon and across Haryana with product selection, dosage trials, and machine-side troubleshooting. Call +91-9312871070 to discuss your requirements.

Request a Quote

Share your machine details — furnish, paper grade, current chemistry, and the problem you are trying to solve — and our technical team will recommend a product mix and a starting dose. Call +91-9312871070 to discuss your requirements in Gurgaon.