Manufacturers, Exporters, Suppliers of Biocides in Maharashtra

Innovacorp is a manufacturer, exporter, and supplier of oxidizing and non-oxidizing biocides for cooling towers, RO systems, and industrial water systems in Maharashtra — Mumbai, Pune, Aurangabad, Nagpur, and Thane. The chemistry is designed to help control biofilm, algae, and microbial growth in recirculating water systems, which protects heat transfer efficiency and system integrity.

Why Biocides Matter in Maharashtra's Industrial Water Systems

An industrial water system is a warm, nutrient-rich environment, and microbes settle in fast. Biofilm on heat exchanger tubes acts as an insulator, reducing heat transfer efficiency. Algae in cooling tower basins plug strainers and reduce airflow. In RO systems, biofilm on the membrane raises differential pressure and cuts recovery. Anyone who has run a cooling tower through a Maharashtra summer knows that a missed biocide dose shows up first as higher condenser pressure, then as a cleaning shutdown.

Where Our Biocides Are Used in Maharashtra

• Cooling towers: recirculating water systems in process plants, HVAC, and power generation.
• RO plants: membrane systems in industrial water treatment and desalination.
• Heat exchangers and condensers: closed-loop and once-through cooling systems.
• Process water systems: paper, textile, and chemical plants where microbial growth affects product quality.
• Effluent treatment (ETP): microbial control in biological treatment stages.

Types We Manufacture, Export & Supply in Maharashtra

• Oxidizing biocides: chlorine-based and peroxide-based chemistries for shock treatment and rapid microbial knockdown.
• Non-oxidizing biocides: quaternary ammonium, isothiazolinone, and DBNPA grades for sustained biofilm control.
• RO membrane biocides: non-oxidizing grades compatible with TFC polyamide membranes.
• Algaecides: for cooling tower basins and open recirculating systems where algae growth is a recurring problem.
• Bio-dispersants: for penetrating and removing established biofilm in cooling and process systems.

Specifications

Property	Typical Value
Appearance	Liquid or solid (grade dependent)
Active content	Grade dependent; confirmed on TDS
pH (as supplied)	Grade dependent
Dosing method	Continuous, slug, or shock — per TDS
Compatibility	Confirmed against system materials and other treatment chemicals
Shelf life	6–24 months in unopened original packing (grade dependent)

Final specification is confirmed on the technical data sheet for each grade.

Application and Dosage

Dosage depends on system volume, microbial load, and the biocide chemistry. Typical starting points:

• Cooling tower (oxidizing): 1–5 ppm free chlorine residual, dosed continuously or as slug.
• Cooling tower (non-oxidizing): 50–200 ppm on system volume, dosed on a slug basis per TDS.
• RO membrane biocide: 100–500 ppm on feed during CIP or preservation, per TDS.
• Algaecide (cooling basin): per TDS, dosed on a maintenance basis.

These are starting points only. Final dose is set after a system survey and confirmed with microbial monitoring.

Packing

• 35 kg HDPE carboys
• 200 kg HDPE drums
• 1000 kg IBC tanks

Key Benefits

• Designed to help control biofilm and algae in cooling towers, RO systems, and process water systems.
• Oxidizing and non-oxidizing grades available for shock and maintenance dosing.
• RO-compatible grades available for TFC polyamide membranes — confirm against your membrane data sheet.
• Bio-dispersant grades available for penetrating established biofilm.
• Supply and technical support available across Maharashtra — Mumbai, Pune, Aurangabad, Nagpur, and Thane.

Technical Support in Maharashtra

Biocide selection is a system decision. The right chemistry depends on the system volume, the microbial load, the metallurgy, and the discharge constraints. We work with your plant and utility team on system surveys, dosing protocols, and microbial monitoring so the program performs on your system. Support is available across Maharashtra — Mumbai, Pune, Aurangabad, Nagpur, and Thane.

Frequently Asked Questions

1. What types of industrial biocides do you supply in Maharashtra?

We manufacture, export and supply oxidizing biocides (chlorine-based, peroxide-based) and non-oxidizing biocides (quaternary ammonium, isothiazolinone, DBNPA) for cooling towers, RO systems, and industrial water systems in Maharashtra. The right grade depends on the system, the microbial load, and the discharge constraints.

2. Which industrial biocides are suitable for cooling towers in Maharashtra?

Cooling tower programs typically combine an oxidizing biocide for quick microbial knockdown and a non-oxidizing biocide for long-term biofilm control. The right combination depends on the make-up water, cycles of concentration, and discharge norms — we confirm this with your plant team.

3. Do you supply biocides to industrial belts in Pune and Thane?

Yes. We supply industrial biocides to major hubs across Maharashtra — including Mumbai, Pune, Thane, Aurangabad, and Nagpur. Call +91-9312871070 to discuss your location and delivery schedule.

4. Do you provide technical support for biocide dosing in Maharashtra?

Yes. We support cooling tower and RO plant operators in Maharashtra with product selection, dosing protocols, and microbial monitoring. Call +91-9312871070 to discuss your requirements.

Request a Quote

Share your system details — cooling tower or RO, system volume, make-up water, and current biocide program — and our technical team will recommend a product and a starting dose. Call +91-9312871070 to discuss your requirements in Maharashtra.