Innovacorp India is a manufacturer, exporter, and supplier of Defoamer in Pune — silicone and non-silicone antifoams for pharma fermentation, effluent treatment, food processing, and sugar processing. Supplied to pharma units, ETP plants, and food processing lines across Pune, Pimpri-Chinchwad, and Chakan, and to sugar processing units in the Maharashtra sugar belt.

Anyone who has run a fermenter or an ETP tank knows the problem: foam builds faster than the process can handle it, and a foam-over costs more than the defoamer itself — lost batch, contaminated vent filter, or a spill on the floor. Defoamer is not a single product. A silicone grade that works in an ETP tank may not suit a fermentation broth where downstream filtration matters. A non-silicone grade that suits the fermenter may not be the most cost-effective for effluent. The right grade depends on the process, temperature, and downstream compatibility — and that is where the specification matters more than the marketing.

Foam Control for Pune's Industrial Processes

Pune's industrial belt — Pimpri-Chinchwad, Chakan, and the surrounding MIDC areas — runs a wide spread of foam-generating processes: pharma fermentation, effluent treatment plants, food processing lines, and chemical process plants. Each generates foam in a different way and needs a different grade. This is why we supply a structured range — silicone, non-silicone, and silicone-polyether — with the grade matched to the process at enquiry, not a single product pushed across all applications.

Technical Overview: How Defoamers Work in Pune Processes

Defoamers work by lowering surface tension at the foam lamella, causing the bubble to collapse. Silicone defoamers — typically silicone oil on a silica carrier — are effective at low dosage and work across a wide temperature range. Non-silicone defoamers — often ester, fatty alcohol, or polyether based — are preferred where silicone is incompatible with the process, for example in fermentation broths where downstream filtration or product purity matters. Silicone-polyether grades combine knockdown with extended antifoaming performance. The right choice depends on the process temperature, the foam-generating medium, and any downstream compatibility requirement — confirmed at enquiry.

Where Defoamer Is Used in Pune & the Surrounding Belt

• Pharma fermentation: Fermenters and bioreactors in Pune's pharma units — where foam control must not affect downstream filtration or product quality.
• Effluent treatment plants (ETP): Aeration tanks and equalisation tanks — where surface foam affects oxygen transfer and discharge quality.
• Food processing: Process lines in food and beverage units — where foam control must be compatible with food-contact requirements.
• Sugar processing (Maharashtra belt): Cane juice clarification, evaporators, and crystallisers in the Kolhapur–Sangli–Satara–Solapur sugar belt — supplied from Pune.
• Distillery fermentation: Fermenters in distilleries — where foam control supports consistent ethanol yield.
• Chemical process plants: Reaction vessels and transfer lines where foam affects throughput.

Types We Manufacture, Export & Supply from Pune

• Silicone Defoamers: Silicone oil on silica carrier — effective at low dosage and across a wide temperature range. For ETP, chemical processing, and general industrial foam.
• Non-Silicone Defoamers (Ester / Fatty Alcohol / Polyether): For fermentation and food processing — where silicone compatibility with downstream processes needs review.
• Silicone-Polyether Defoamers: Combine knockdown with extended antifoaming — for processes where both are needed.
• Food-Grade Defoamers: Grades intended for food processing applications — food-contact compliance confirmed at enquiry.

Grade selection depends on your process, temperature, and downstream compatibility — confirmed at the enquiry stage.

Specifications

Property	Typical Value
Appearance	Milky white to pale liquid (grade-dependent)
Chemistry	Silicone, non-silicone, or silicone-polyether (grade-dependent)
Active Content	Grade-dependent; confirmed on datasheet
pH (as supplied)	Near-neutral to slightly alkaline, grade-dependent
Viscosity	Grade-dependent; confirmed on datasheet
Dosage Range	Typically 50–500 ppm; confirmed after a plant trial
Shelf Life	12 months (unopened, cool dry storage), grade-dependent

Final specification confirmed after a plant trial on your process stream.

Application and Dosage

Dosage depends on the foam load, process temperature, and defoamer grade. Typical starting guidance for Pune plants:

• Fermenters: Dosed into the fermenter or feed line — dose confirmed against foam load and downstream filtration compatibility.
• ETP aeration tanks: Dosed at the foam-generating point — dose confirmed against surface foam and oxygen transfer.
• Sugar evaporators (Maharashtra belt): Dosed into juice or syrup lines — dose confirmed against foam load at operating temperature.
• Chemical process plants: Dosed into the reaction vessel or transfer line — dose confirmed against foam load and process conditions.

We recommend a plant trial before establishing the dose. Final dosage is confirmed with your process team.

Packing

• 20 L / 50 L HDPE cans
• 200 L HDPE drums
• 1000 L IBC tanks on request
• Storage: cool, dry, away from direct sunlight; keep containers sealed until use

Key Benefits

• Helps control surface foam and entrained air in fermentation, ETP, and sugar processing
• Grade-specific chemistry — silicone, non-silicone, and silicone-polyether
• Silicone grades work at low dosage across a wide temperature range
• Non-silicone grades for fermentation and food processing where silicone compatibility needs review
• Technical guidance on grade selection, dosage, and feed point

Technical Support

We work with process engineers, plant operators, and technical teams in Pune on defoamer selection, dosing, and application. Support includes guidance on feed point, dilution, and downstream compatibility — including for sugar processing units in the Maharashtra belt supplied from Pune.

Frequently Asked Questions

1. Do you manufacture, export and supply Defoamer in Pune?

Yes. We manufacture, export and supply defoamer in Pune — silicone and non-silicone grades for pharma fermentation, ETP, food processing and sugar processing — with technical support on dosage, feed point and application.

2. Which Pune industries use your defoamer range?

Our defoamer range is used by pharma fermentation units, effluent treatment plants, food processing lines, and chemical process plants across Pune, Pimpri-Chinchwad and Chakan. Sugar processing units in the Maharashtra sugar belt are also supplied from Pune. Each grade is matched to the process at enquiry.

3. What is the difference between silicone and non-silicone defoamers for Pune processes?

Silicone defoamers are typically more effective at low dosage and work across a wide temperature range. Non-silicone defoamers are often preferred where silicone is not compatible with the process — for example, in certain fermentation or coating applications. The right choice depends on the process, temperature and downstream compatibility — confirmed at enquiry.

4. How is Defoamer packed and supplied to Pune?

Defoamer is supplied as a liquid in 20 L / 50 L HDPE cans and 200 L HDPE drums, with bulk IBC supply on request. Delivery timelines for Pune and nearby areas are confirmed at the quotation stage.

Request a Quote

For pricing, samples, or a technical discussion on Defoamer for your Pune plant, call us at +91-9312871070. Our team will help you select the right grade for your process.