Innovacorp India Pvt Ltd manufactures, exports, and supplies cooling tower chemicals to industrial plants in Saudi Arabia. The range covers scale inhibitors, corrosion inhibitors, oxidizing and non-oxidizing biocides, and bio-dispersants. Technical support is available across Saudi Arabia from our New Delhi office.
A cooling tower in Riyadh or Yanbu runs on make-up water that is often desalinated, blended, or high in total dissolved solids (TDS). The ambient temperature in summer pushes the circulating water temperature higher than in temperate climates, which raises both the scaling tendency and the biological growth rate. The combination means the chemical program cannot be a copy of a temperate-climate program — it has to be set for high TDS, high heat, and high evaporation. That is the starting point for every program we design for a Saudi plant.
COC is the ratio of dissolved solids in the circulating water to dissolved solids in the make-up water. A higher COC means less make-up water and less blowdown — good for water economy, which matters in Saudi Arabia. But a higher COC also means higher scaling and corrosion risk. In a high-TDS make-up water, the COC ceiling is lower than in a soft-water plant. The chemical program is set for the COC your tower actually runs at, not a generic number.
| Make-up Water TDS | Typical COC Ceiling | Chemical Demand |
|---|---|---|
| Low (< 500 ppm) | 4 to 6 | Standard inhibitor and biocide program |
| Medium (500 to 1500 ppm) | 3 to 4 | Higher inhibitor dose, tighter control |
| High (> 1500 ppm) | 2 to 3 | Specialty inhibitor package, close monitoring |
Calcium carbonate and silica deposit on hot heat transfer surfaces. In Saudi Arabia's high evaporation conditions, the concentration factor is higher, so the scaling tendency is higher. Scale inhibitors and antiscalants keep these minerals in suspension so they leave with the blowdown. Dose is set based on COC, make-up water hardness, and system volume.
Dissolved oxygen, chloride, and low pH drive corrosion on mild steel and copper alloys. High chloride in the make-up water makes pitting a particular concern. Corrosion inhibitors form a thin film on the metal surface that limits attack. The correct inhibitor package depends on the metallurgy and the chloride level, and is set after a water analysis.
High ambient temperatures in Saudi Arabia support rapid microbial growth. Biofilm forms on pipe walls, reduces heat transfer, and shelters bacteria from biocide attack. The program uses a combination of oxidizing biocides (for routine control) and non-oxidizing biocides (for biofilm penetration), with bio-dispersants to break up the film. Dose and frequency are set after a baseline microbial test.
Suspended solids — dust, organic debris, corrosion products — settle in low-flow areas of the tower basin and distribution pipes. In Saudi Arabia's dust-prone environment, the load can be higher than in temperate climates. Dispersants keep these solids suspended so they leave with the blowdown.
| Parameter | Typical Value |
|---|---|
| Appearance | Varies by product — confirm on TDS |
| Active content | Product-specific — confirm on TDS |
| pH (as supplied) | Product-specific — confirm on TDS |
| Density | Confirm on TDS |
| Application point | Cooling tower basin or circulating line — confirm on TDS |
| Shelf life | Confirm on TDS; store away from direct sunlight and heat |
Final specification is confirmed after a cooling water analysis and COC review.
We supply to industrial plants across Saudi Arabia, including Riyadh, Jeddah, Dammam, and Yanbu. Delivery is arranged through our export logistics partners. For a specific location, call +91-9312871070.
We do not claim zero downtime, zero scaling, or complete microbial elimination. Cooling tower chemistry is a control program, not a guarantee. We also do not claim that the chemicals can be discharged without treatment — cooling tower blowdown needs to meet local discharge norms, and the program is designed with that in mind. What the program does is help control scale, corrosion, and biofilm within the operating window of your tower.
We work with your maintenance team on cooling water analysis, COC review, dose confirmation, and biocide rotation schedule. Onsite visits to Saudi Arabia plants can be arranged on request. For a quote or technical discussion, call +91-9312871070.
We manufacture, export and supply scale inhibitors, corrosion inhibitors, oxidizing biocides, non-oxidizing biocides, and bio-dispersants for cooling towers in Saudi Arabia. The product mix is confirmed after a cooling water analysis and site survey.
High ambient temperatures support rapid microbial growth in cooling circuits. We supply non-oxidizing biocides and bio-dispersants for biofilm control. The dose and frequency are set after a baseline microbial test on your cooling water, and the program is reviewed through the summer season.
Dosage depends on the cycles of concentration (COC), make-up water TDS, and system volume. Scale and corrosion inhibitors are typically dosed at 5 to 50 ppm in the circulating water, with biocide dose set by microbial load. Our technical team supports trial design and dose confirmation.
Yes. We manufacture, export and supply cooling tower chemicals in packing of 5 L, 20 L, 35 L, and 200 L HDPE carboys and drums. For Saudi Arabia orders, call +91-9312871070.
For a quote or technical discussion, call +91-9312871070.
© 2026 Innovacorp India Pvt Ltd. All Rights Reserved. Managed & Developed by Innova Corporate India
Chat with Us