“Clean Surfaces. Safe Patients. Compliant Protocols.”

Innovacorp is a hospital disinfectant manufacturer in Hyderabad, supplying surface disinfectants, instrument disinfectants, hand rubs and fumigation agents to hospitals, diagnostic centres, clinics and dental practices across the city. Hyderabad's healthcare sector has grown rapidly — from multi-specialty hospitals in Somajiguda and Nampally to diagnostic chains in Ameerpet and Banjara Hills. Each facility has its own infection control protocol, its own surface mix, and its own instrument load. Our job is to match the disinfectant to your protocol, not the other way around.

Why Hospital Disinfectants Matter in Hyderabad

Hospital-acquired infections (HAIs) are a serious concern in any healthcare facility. In high-footfall hospitals, pathogens move from patient to patient through surfaces, instruments and hands. A well-designed disinfection program breaks this chain at three points: high-touch surfaces, reusable instruments and hand hygiene.

Hyderabad's hospitals also face specific challenges: high patient volumes, varied surface materials (stainless steel, epoxy, vinyl, glass), and the need to meet accreditation requirements. Disinfectants that work on one surface may damage another. Contact time matters — if a disinfectant needs 10 minutes but the ward is cleaned in 3, the protocol fails.

Where It Is Used — Hyderabad Healthcare Facilities

• Multi-Specialty Hospitals: Somajiguda, Nampally, Banjara Hills, Jubilee Hills — OTs, ICUs, wards and OPDs.
• Diagnostic Centres: Ameerpet, Punjagutta, Secunderabad — sample collection rooms, imaging rooms and waiting areas.
• Dental Clinics: Across Hyderabad — instrument disinfection and chair-side surface cleaning.
• Nursing Homes & Maternity Centres: Suburban Hyderabad — labour rooms, neonatal units and general wards.
• Dialysis Centres: Dedicated units — machine surface disinfection and reusable instrument care.
• Pharma & Clinical Research: Genome Valley, Shamirpet — cleanroom and lab surface disinfection.

Types We Manufacture

• Surface Disinfectants: Quaternary ammonium and hydrogen peroxide based. For high-touch surfaces, floors, walls and equipment.
• Instrument Disinfectants: Glutaraldehyde and peracetic acid based. For endoscopes, surgical instruments and dental tools.
• Hand Rubs & Antiseptics: Alcohol-based and chlorhexidine-based. For hand hygiene at point of care.
• Fumigation Agents: For OT fumigation and terminal disinfection.
• Detergent-Disinfectant Combos: For combined cleaning and disinfection in wards.

Typical Specifications

Indicative values from our standard hospital disinfectant range. Final specification is confirmed against your surface type and protocol requirements.

Parameter	Typical Value
Appearance	Clear to coloured liquid
Type	Surface / instrument / hand rub / fumigation
pH (concentrate)	2.0 – 8.0 (varies by product)
Active Content	0.5% – 2.0% (as per product)
Density	0.85 – 1.05 g/cc
Shelf Life	12-24 months from manufacture

Application and Contact Time

Contact time depends on the product and the target organism. Indicative ranges:

• General Surface Disinfection: 5 – 10 minutes contact time, diluted 1:20 to 1:40.
• High-Level Instrument Disinfection: 10 – 30 minutes contact time, ready-to-use or diluted as per protocol.
• Hand Rub: 20 – 30 seconds contact time, ready-to-use.
• OT Fumigation: As per protocol, typically overnight with sealed room.
• Detergent-Disinfectant: 5 – 10 minutes, diluted 1:40 to 1:80.

Exact contact time and dilution should follow the product label and your hospital's infection control protocol. We work with your infection control team to review the protocol and recommend the right product.

Packing

• Liquid Form: 5 litre cans, 20 litre cans and 50 litre HDPE drums.
• Hand Rub: 500 ml bottles, 5 litre cans and 20 litre cans.
• Bulk Supply: 200 litre HDPE drums available on request for large hospitals.

Key Benefits

• Broad-Spectrum Formulations: Effective against bacteria, fungi and viruses relevant to hospital environments.
• Rapid Contact Time: Fast-acting formulations reduce room turnover time.
• Material Compatible: Formulations suitable for stainless steel, epoxy, vinyl and glass surfaces.
• MSDS Available: Safety data sheets provided for each product for hospital compliance.
• Protocol Support: Technical guidance on dilution, contact time and rotation.

Technical Support

Disinfection protocols are not a one-time decision. Surface materials change, instrument loads change, and accreditation requirements change. Our technical team works with your infection control officer or housekeeping head to review the surfaces in your facility, the instruments being processed, and the current protocol. For Hyderabad hospitals, we provide on-site support for trial runs and staff training on dilution and contact time.

Frequently Asked Questions

Q. What disinfectants are used in hospital OTs?
OT disinfection typically uses a combination of surface disinfectants (quaternary ammonium or hydrogen peroxide based), instrument disinfectants (glutaraldehyde or peracetic acid based) and hand sanitizers. The choice depends on the surface and the level of disinfection required.

Q. What is the contact time for hospital disinfectants?
Contact time depends on the product and the target organism. Typical ranges: 5-10 minutes for general surface disinfection, 10-30 minutes for high-level disinfection. Always follow the product label and MSDS.

Q. Do you supply hospital disinfectants in bulk to Hyderabad?
Yes, we supply in 5 litre cans, 20 litre cans and 50 litre HDPE drums. Bulk quantities are available for Hyderabad hospitals and diagnostic centres on request.

Q. Are MSDS and test reports available?
Yes, MSDS is available for each product. Test reports for specific organisms are available on request. Final usage and contact time should follow the product label and your hospital's infection control protocol.

Request a Quote

Share your facility type, surface mix and current disinfection protocol. Our technical team will recommend the right product combination for your Hyderabad facility.

Request a Quote

Or call +91-9312871070