“Broad-Spectrum Kill. No Harmful Residue. CIP-Ready.”

Innovacorp manufactures peracetic acid (PAA) in Hyderabad for industries that need high-level disinfection without chlorinated by-products. PAA is used in three main ways: as a CIP disinfectant in food and beverage plants, as a cold sterilant for equipment and packaging, and as an oxidising biocide in cooling towers and wastewater treatment. In Hyderabad, the demand comes mainly from food processing units, beverage bottlers, dairy plants, pharma companies around Genome Valley, and commercial cooling systems. Each application has its own contact time and concentration requirement.

Why PAA Over Conventional Disinfectants in Hyderabad

Chlorine-based disinfectants are effective, but they form disinfection by-products (DBPs) such as trihalomethanes when they react with organic matter. In food and beverage plants, these by-products are a concern — both for product quality and for discharge compliance. PAA breaks down into acetic acid, oxygen and water. It leaves no chlorinated residue, and it does not form DBPs.

PAA also performs better at low temperatures and across a wider pH range than chlorine. In Hyderabad, where food processing units run CIP cycles with varying water temperatures, this matters. PAA maintains its oxidation potential even when the water is cold, which chlorine does not.

Where It Is Used — Hyderabad Applications

• Food & Beverage Plants: CIP disinfection of tanks, pipelines, fillers and packaging equipment across Hyderabad's food processing belt.
• Dairy & Ice Cream Units: Cold sterilisation of milking equipment, storage tanks and processing lines.
• Pharma & Biotech: Genome Valley, Shamirpet, Bollaram — surface and equipment disinfection in non-sterile areas.
• Beverage Bottlers: Bottle rinsing, filler disinfection and packaging line sanitation.
• Cooling Towers: Biofilm and algae control in recirculating cooling water systems.
• Wastewater Treatment: Final disinfection in ETP and STP plants, especially where chlorinated by-products are a concern.

Types We Manufacture

• PAA 5% Solution: For surface disinfection and general sanitation.
• PAA 15% Solution: For CIP applications and industrial disinfection.
• PAA 22% Solution: For high-level disinfection and cooling tower treatment.
• PAA 35% Solution: For concentrated industrial use and large-scale disinfection.
• PAA-Based CIP Cleaner: Blended with surfactants for combined cleaning and disinfection.

Typical Specifications

Specifications vary by concentration. Indicative ranges are given below. Final specification is confirmed for each application.

Parameter	Typical Value
Appearance	Clear, colourless to pale yellow liquid
Active Content	5% – 35% (as per grade)
pH (1% solution)	2.0 – 3.5
Density	1.00 – 1.15 g/cc
Odour	Pungent, vinegar-like
Shelf Life	6 – 12 months from manufacture (cool storage)

Application and Dosage

Dosage depends on the application and contact time. Indicative ranges:

• CIP Cleaning: 0.1% – 0.5% solution, contact time 10 – 20 minutes.
• Surface Disinfection: 0.1% – 0.2% solution, contact time 5 – 10 minutes.
• Bottle Rinsing: 0.05% – 0.1% solution, contact time 1 – 2 minutes.
• Cooling Tower: 5 – 15 ppm available PAA, continuous or shock dosing.
• Wastewater Disinfection: 5 – 15 ppm, contact time 30 – 60 minutes.

Exact dosage is confirmed based on your application and contact time. We work with your plant team to run a trial before finalising the dose.

Packing

• Small Pack: 5 litre cans and 20 litre cans.
• Medium Pack: 50 litre HDPE drums and 200 litre HDPE drums.
• Bulk Supply: 1000 litre IBC tanks available on request for large plants.

Key Benefits

• No Chlorinated By-Products: Breaks down into acetic acid, oxygen and water — no DBPs.
• Works at Low Temperature: Effective in cold CIP cycles where chlorine loses activity.
• Broad-Spectrum: Effective against bacteria, fungi, yeast and spores at recommended doses.
• Wide pH Range: Active across a broader pH range than chlorine.
• No Rinsing Required: At food-contact concentrations, no additional rinse step is needed.

Technical Support

Disinfection protocols are application-specific. Contact time, concentration and temperature all affect performance. Our technical team reviews your application, current protocol and target organisms, then recommends the right PAA grade and dosage. For Hyderabad food and pharma facilities, we provide on-site support for trial runs and protocol optimisation.

Frequently Asked Questions

Q. Where can I source Peracetic Acid for food processing in Hyderabad?
Innovacorp India Pvt Ltd manufactures peracetic acid for CIP cleaning and food processing applications in Hyderabad. Request a quote for bulk supply.

Q. What is the difference between PAA and chlorine for disinfection?
PAA breaks down into acetic acid, oxygen and water, leaving no chlorinated by-products. Chlorine can form trihalomethanes and other disinfection by-products. The choice depends on the application, contact time and discharge requirements.

Q. What is the dosage of peracetic acid?
Dosage depends on the application. Typical ranges: CIP cleaning 0.1-0.5% solution, food processing surface disinfection 0.1-0.2%, wastewater disinfection 5-15 ppm. Final dosage is confirmed based on your application and contact time.

Q. Do you supply peracetic acid in bulk to Hyderabad?
Yes, we supply in 5 litre cans, 20 litre cans and 50 litre HDPE drums. Bulk quantities are available for Hyderabad industries on request.

Request a Quote

Share your application, current disinfection protocol and target organisms. Our technical team will recommend the right PAA grade and dosage for your plant.

Request a Quote

Or call +91-9312871070