Manufacturers, Exporters, Suppliers of Descaling Systems in India

Innovacorp manufactures inhibited acid descalers and CIP (Clean-In-Place) chemical systems for industrial boilers, heat exchangers, chillers, and process pipelines. The job is simple to describe and hard to do well: dissolve calcium and silica scale without attacking the base metal underneath.

Why Scale Removal Matters

Scale is an insulator. A millimetre of calcium carbonate on a boiler tube can cut heat transfer enough to raise fuel consumption measurably. On a chiller condenser, it raises condensing pressure and compressor load. On a heat exchanger, it slows flow and pushes pump duty up. Anyone who has watched a boiler lose steam output over a season, or a chiller trip on high head pressure, knows that scale rarely announces itself — it just quietly eats efficiency until maintenance becomes urgent.

Where Our Descalers Are Used

• Industrial boilers: water-side scale removal from tubes and drums.
• Heat exchangers: shell-and-tube and plate-type cleaning.
• Chillers & condensers: HVAC and process cooling water circuits.
• Cooling towers: fill and basin scale removal.
• Process pipelines and vessels: CIP circulation for dairy, food, pharma, and chemical process lines.
• Evaporators and crystallizers: selected grades for process industry evaporator service.

Types We Manufacture

• Sulfamic acid based descalers: safer handling than HCl, suitable for a wide range of metals including copper and mild steel.
• Inhibited hydrochloric acid descalers: fast dissolution of hard carbonate scales; inhibitor package protects base metal.
• Citric acid and EDTA based descalers: for sensitive metallurgy and passivation-type cleaning.
• CIP circulation systems: chemical + circulation setup for process lines requiring regular cleaning cycles.

Specifications

Property	Typical Value
Appearance	Clear to pale-coloured liquid (grade dependent)
Active acid content	Grade dependent; confirmed on TDS
pH (concentrate)	Acidic; grade dependent
Specific gravity	1.05 – 1.20 (grade dependent)
Inhibitor package	Designed for MS, SS, copper, and brass surfaces
Shelf life	12 months in unopened original packing

Final specification and metallurgy suitability are confirmed after water and deposit analysis.

Application and Dosage

Dosage and contact time depend on scale type, thickness, and system metallurgy. Typical starting ranges:

• Boiler water-side cleaning: 5–15% v/v circulation, contact time 2–6 hours.
• Heat exchanger CIP: 5–10% v/v circulation, contact time 1–4 hours.
• Chiller / condenser cleaning: 5–10% v/v circulation, contact time 2–4 hours.
• Process line CIP: grade and dose selected by CIP protocol and product contact requirements.

These are starting points. Final dose and contact time are set on site after a deposit analysis and a coupon test.

Packing

• 35 kg HDPE carboys
• 200 kg HDPE drums
• 1000 kg IBC tanks

Key Benefits

• Dissolves carbonate, sulphate, and silicate scales commonly found in industrial water systems.
• Inhibitor package designed to protect mild steel, stainless steel, copper, and brass during the clean.
• Helps restore heat transfer efficiency in boilers, heat exchangers, and chillers.
• Reduces maintenance downtime by shortening the cleaning cycle.
• Available as sulfamic, inhibited HCl, citric, and EDTA based systems to match scale type and metallurgy.

Technical Support

Descaling is a chemistry decision plus a metallurgy decision. We work with your maintenance and process engineers to select the right acid system, confirm the inhibitor package against your metals, and set contact time for your specific scale. Deposit analysis support is available PAN India.

Frequently Asked Questions

1. What types of scale can be removed with your descalers?

Our inhibited acid descalers are designed to dissolve calcium carbonate, calcium sulphate, and silicate-based scales found in industrial boilers, heat exchangers, and chillers. The grade is selected after analysing the deposit sample.

2. Are your descalers safe for copper and mild steel surfaces?

The descalers are formulated with inhibitors designed to protect mild steel, stainless steel, copper, and brass during cleaning. Actual suitability depends on system metallurgy and is confirmed with a coupon test before the clean.

3. What is the typical contact time for descaling a boiler?

Contact time depends on scale thickness and type. Typical cleaning cycles run between 2 and 6 hours; thicker scales may need a second circulation. Final contact time is set on site.

4. Do you provide on-site descaling support?

We provide technical guidance for on-site CIP and circulation cleaning PAN India. For systems where the cleaning needs to be supervised, our team can be involved through the cycle. Call +91-9312871070 to discuss your system and schedule.

Request a Quote

Share your system details — equipment type, metallurgy, scale appearance, and cleaning window — and our technical team will recommend a descaler grade and a starting dose. Call +91-9312871070 to discuss your application.