Manufacturers, Exporters, Suppliers of Filter Media in Odisha

Innovacorp is a manufacturer, exporter, and supplier of filter media for water treatment plants in Odisha — silica sand, anthracite, activated carbon, garnet, and iron removal media, with support gravel for the full bed. The media is used in pressure filters, dual media filters, multi-grade filters, and activated carbon filters across WTP, ETP, and STP systems. The right media depends on the filter design, the inlet water quality, and what you are trying to remove.

Why Filter Media Quality Matters in Odisha

Filter media is the working surface of a water treatment plant. If the grain size distribution is uneven, the bed channels and the filtrate quality drops. If the media is soft, it breaks down under backwash and the bed loses depth. If the media is not properly washed, it leaches colour and the filtrate is worse than the feed. Anyone who has run a filter bed through a few years of operation knows that media quality shows up slowly — as rising turbidity in the filtrate, as shorter runs between backwash, and as media loss on backwash. The right media holds its performance across the bed life.

Where Our Filter Media Is Used in Odisha

• Water treatment plants (WTP): pressure sand filters and dual media filters for turbidity and TSS removal.
• Effluent treatment plants (ETP): tertiary filtration ahead of discharge or reuse.
• Sewage treatment plants (STP): tertiary filtration for polishing.
• Activated carbon filters: colour, odour, and organics removal.
• Iron removal filters: catalytic media for dissolved iron removal from groundwater.
• Swimming pools: filter sand for pool filtration systems.

Types We Manufacture, Export & Supply in Odisha

• Silica sand: washed and graded for filtration; available in different effective sizes and uniformity coefficients.
• Anthracite: for dual media and multi-grade filters; lighter than sand, allowing higher filtration rates.
• Activated carbon: granular activated carbon (GAC) for colour, odour, and organics removal.
• Garnet: high-density media for multi-grade filters and high-rate filtration.
• Iron removal media: catalytic media for dissolved iron and manganese removal.
• Support gravel and pebbles: graded gravel for the bottom support layer of the filter bed.

Specifications

Property	Typical Value
Appearance	Granular (media dependent)
Effective size (ES)	0.45–1.0 mm for silica sand; grade dependent
Uniformity coefficient (UC)	< 1.5 typical for filtration grades
Bulk density	Media dependent; confirmed on TDS
Acid solubility	< 2% typical for washed silica sand
Bed depth	Per filter design; typically 600–1200 mm

Final specification is confirmed on the technical data sheet for each grade.

Application and Dosage

Media loading depends on filter design and bed depth. Typical starting points:

• Pressure sand filter: 600–900 mm bed depth; media size per filter design.
• Dual media filter (anthracite + sand): 300–450 mm anthracite over 300–450 mm sand, with support gravel underneath.
• Multi-grade filter: garnet, sand, and anthracite layers, per filter design.
• Activated carbon filter: 600–1200 mm bed depth, per TDS and contact time requirement.
• Iron removal filter: bed depth and media volume per iron load and flow rate.

These are starting points only. Final media loading is set on the filter design and confirmed on commissioning.

Packing

• 25 kg HDPE bags
• 50 kg HDPE bags
• 1000 kg jumbo bags

Key Benefits

• Washed and graded media designed for stable performance across the bed life.
• Available in a range of effective sizes and uniformity coefficients to match filter design.
• Silica sand, anthracite, activated carbon, garnet, and iron removal media available from a single source.
• Support gravel and pebbles available for the full filter bed.
• Supply and technical support available across Odisha — Bhubaneswar, Jharsuguda, Rourkela, and other districts.

Technical Support in Odisha

Filter media selection is a design decision. The right media depends on your filter design, your inlet water quality, and your target filtrate quality. We work with your plant and engineering team on media selection, bed loading, and backwash optimisation so the bed performs as designed. Support is available across Odisha — Bhubaneswar, Jharsuguda, Rourkela, and other districts.

Frequently Asked Questions

1. Where can I buy silica sand for filtration in Odisha?

We manufacture, export and supply washed silica sand graded for industrial water filtration and swimming pool filters in Odisha. Grades are available in different effective sizes and uniformity coefficients — the right grade depends on your filter design and is confirmed with your plant team.

2. What are the components of a dual media filter?

A typical dual media filter uses a top layer of anthracite and a bottom layer of fine silica sand, with gravel support underneath. The combination supports turbidity and TSS removal by combining coarse filtration at the top with fine filtration at the bottom.

3. What is the difference between silica sand and activated carbon as filter media?

Silica sand is used for particulate filtration — it removes suspended solids and turbidity. Activated carbon is used for adsorption — it removes dissolved organics, colour, chlorine, and odour. In many WTP and ETP designs, both are used in sequence.

4. Do you supply filter media in bulk in Odisha?

Yes. We supply in 25 kg, 50 kg, and 1000 kg jumbo bags to WTP, ETP, and STP projects across Odisha — including Bhubaneswar, Jharsuguda, Rourkela, and other districts. Call +91-9312871070 to discuss your requirements.

Request a Quote

Share your filter design details — filter type, bed depth, inlet water quality, and target filtrate quality — and our technical team will recommend a media grade and loading. Call +91-9312871070 to discuss your requirements in Odisha.