Manufacturers, Exporters, Suppliers of Microbial Culture in Odisha

Innovacorp is a manufacturer, exporter, and supplier of multi-strain microbial culture for effluent treatment plants (ETP) and sewage treatment plants (STP) in Odisha — including Bhubaneswar, Puri, and Cuttack. The culture is used for bio-augmentation: it supports the biomass in the aeration tank, which helps the plant hold MLSS, degrade organic load, and control odour across the treatment train.

Why Bio-Augmentation Matters in Odisha ETPs

Biological treatment in Odisha runs against specific conditions: high organic loads from food processing, mining, and refinery zones; variable inlet quality across the season; and plants that often operate close to their design limits. When the biomass in the aeration tank is stressed, MLSS drops, COD and BOD slip, and odour builds up in the equalisation tank. Anyone who has run an ETP through a shock load knows that recovery is slow if the biomass is not supported. Bio-augmentation is how you support it.

Where Our Microbial Culture Is Used in Odisha

• Industrial ETP aeration tanks: bio-augmentation to support MLSS and COD/BOD reduction.
• STP plants: biomass support in municipal and township sewage treatment.
• Equalisation and holding tanks: odour control and organic load reduction.
• Anaerobic and aerobic digesters: culture support for sludge stabilisation.
• Food processing and beverage ETPs: high-organic-load effluent where biomass stability is critical.

Types We Manufacture, Export & Supply in Odisha

• Multi-strain aerobic culture: for standard activated sludge ETPs and STPs.
• Anaerobic culture: for digesters and anaerobic treatment stages.
• Odour control culture: for equalisation tanks and holding tanks.
• Sludge reduction culture: for digesters where sludge volume is a constraint.
• Powder and liquid forms: powder for standard dosing, liquid for plants that prefer liquid handling.

Specifications

Property	Typical Value
Appearance	Powder or liquid (grade dependent)
CFU count	Grade dependent; confirmed on TDS
Bacterial strains	Multi-strain consortium (aerobic or anaerobic)
pH range (activity)	6.5 – 8.5
Temperature range	20°C – 40°C
Shelf life	12 months in unopened original packing (powder); 6 months (liquid)

Final specification is confirmed on the technical data sheet for each grade.

Application and Dosage

Dosage depends on the aeration tank volume, existing MLSS, inlet COD load, and the grade selected. Typical starting points:

• Activated sludge ETP (initial seeding): 50–100 ppm on aeration tank volume.
• Activated sludge ETP (maintenance): 5–20 ppm on aeration tank volume per day.
• Shock load recovery: 100–200 ppm on aeration tank volume, dosed over 3–5 days.
• Odour control (equalisation tank): per TDS; adjusted to tank volume and odour severity.

These are starting points only. Final dose is set on a plant trial with MLSS and COD monitoring before and after dosing.

Packing

• 5 kg HDPE bags
• 25 kg HDPE bags
• 50 kg HDPE drums

Key Benefits

• Supports MLSS in the aeration tank, which helps the plant hold biomass through shock loads.
• Designed to support COD and BOD reduction in biological treatment stages.
• Helps control odour in equalisation and holding tanks.
• Available in aerobic, anaerobic, odour-control, and sludge-reduction variants to match your plant.
• Powder and liquid forms available to match your dosing setup.

Technical Support in Odisha

Bio-augmentation works on the plant, not on paper. The right culture and dose depend on your inlet COD, your existing MLSS, and your aeration capacity. We work with your plant team on culture selection, dosing, and MLSS/COD monitoring so the program performs on your plant. Support is available across Odisha — Bhubaneswar, Puri, Cuttack, and other districts.

Frequently Asked Questions

1. What types of microbial culture do you supply in Odisha?

We manufacture, export and supply multi-strain aerobic and anaerobic microbial cultures for ETP and STP plants in Odisha. The right culture depends on the effluent type, the existing biomass, and the load on the plant, and is confirmed with your plant team.

2. How does bio-augmentation help Odisha factories meet pollution norms?

Bio-augmentation supports the MLSS in your aeration tank and helps the biomass degrade organic pollutants. Whether the outlet COD and BOD meet your discharge norms depends on plant design, load, and operation — we confirm this on a plant trial with your team. Compliance with Pollution Control Board norms is verified by your own monitoring.

3. What dosage of microbial culture is used in an ETP?

Typical starting dose depends on the aeration tank volume, existing MLSS, and inlet COD load. Dose is set on a plant trial with MLSS and COD monitoring before and after dosing. Call +91-9312871070 to discuss your plant details.

4. Do you supply microbial culture in bulk in Odisha?

Yes. We supply in 5 kg, 25 kg, and 50 kg packs to ETP and STP plants across Odisha — including Bhubaneswar, Puri, Cuttack, and other districts. Call +91-9312871070 to discuss your requirements.

Request a Quote

Share your plant details — inlet COD, aeration tank volume, existing MLSS, and treatment stage — and our technical team will recommend a culture and a starting dose. Call +91-9312871070 to discuss your requirements in Odisha.