Manufacturers, Exporters, Suppliers of Speciality Chemicals in Bhutan

Innovacorp India Pvt Ltd is a manufacturer, exporter, and supplier of speciality chemicals for sugar mills in Bhutan. Our range covers juice clarification aids, biocides, RO antiscalants, boiler and cooling water chemicals, decolorisation resins, and effluent treatment cultures. Sugar processing has many chemical touchpoints — from the mill tandem to the boiling house to the boiler and ETP — and each one has its own constraints. The right program is built around the mill's juice profile, water chemistry and process stage, not a fixed list of products.

Why Speciality Chemicals Matter in Sugar Processing

A sugar mill runs on a chain of chemical decisions: how well the juice clarifies, how much sucrose is lost in filter cake, how much scale builds on evaporator tubes, how stable the boiler water is, and how well the ETP handles the load. Each of these is influenced by a different chemical — a polyelectrolyte for settling, a biocide for microbial control, an antiscalant for evaporators, an oxygen scavenger for the boiler, and a bio-culture for the ETP. The chemistry has to work together, not in isolation. That is why a mill-scale program is built around the plant's actual conditions, confirmed through jar tests and plant trials.

Where It Is Used

• Juice clarification: Polyelectrolytes and polyDADMAC for mud settling and juice clarity.
• Microbial control: Oxidising and non-oxidising biocides for sucrose preservation in juice and process streams.
• Membrane and water treatment: RO antiscalants for boiler feed water plants.
• Boiler and cooling water: Oxygen scavengers, corrosion inhibitors and scale inhibitors for utility systems.
• Decolorisation and polishing: Ion exchange resins for low-ICUMSA white sugar.
• Effluent treatment: Bio-cultures and treatment aids for ETP load reduction.

Types We Manufacture, Export & Supply in Bhutan

• Juice clarification aids: Anionic polyelectrolytes and polyDADMAC for clarification and mud settling.
• Biocides: Oxidising and non-oxidising grades, including silver-stabilised hydrogen peroxide where permitted, for microbial control in juice and process streams.
• RO antiscalants: For boiler feed water RO plants handling silica and hardness.
• Boiler water chemicals: Oxygen scavengers, scale inhibitors and pH conditioners for high-pressure boilers.
• Cooling water chemicals: Scale, corrosion and biofouling control for mill cooling towers.
• Decolorisation resins: Anion exchange resins for syrup and melt polishing.
• ETP bio-cultures: For BOD/COD reduction in mill and distillery effluent.

Specification Table

Because speciality chemicals cover a wide product range, the table below gives indicative ranges. Actual specification is confirmed per product against the datasheet.

Property	Typical Range
Appearance	Liquid, powder or granular (product dependent)
pH (as supplied)	1.5 – 12.0 (product dependent)
Active content	20% – 99% (product dependent)
Density (at 25°C)	0.95 – 1.30 g/cm³ (liquid products)
Solubility	Water-soluble or water-dispersible (product dependent)
Shelf life	12 – 24 months in unopened original packing (product dependent)
Storage	Product-specific; refer to SDS for each chemical

Final specification is confirmed against the product datasheet and after a plant trial on your process.

Application and Dosage

Dosage depends on the process stage, the stream and the target result. Representative starting ranges:

• Juice clarification (polyelectrolyte): 1 – 5 ppm on juice, confirmed by jar test.
• Juice clarification (polyDADMAC): 5 – 30 ppm on juice, confirmed by jar test.
• Biocide (oxidising): Dose confirmed against the target residual and the contact time in the process stream.
• RO antiscalant: 3 – 8 ppm in feed water, adjusted after a scaling projection.
• Boiler oxygen scavenger: Dose confirmed against the dissolved oxygen level and the boiler pressure.
• ETP bio-culture: Dose confirmed against the BOD/COD load and the aeration capacity.

Feed points, dosing method and program design are discussed with your process engineers. Final dosage is confirmed after a jar test or plant trial.

Packing

• 35 kg / 50 kg HDPE carboys and drums (liquids)
• 200 kg HDPE drums (liquids)
• 25 kg HDPE-lined bags (powders)
• 1,000 kg IBC tanks (liquids)
• 500 kg / 1,000 kg jumbo bags (powders)

Key Benefits

• Helps improve juice clarity and mud settling when used as part of a clarification program.
• Supports sucrose recovery by reducing microbial losses in juice and process streams.
• Helps protect evaporator and boiler heat transfer surfaces from scale and corrosion.
• Supports stable decolorisation performance across the campaign when regenerated on schedule.
• ETP bio-cultures help reduce BOD/COD load in mill and distillery effluent.

Technical Support

Speciality chemicals work only when the program matches the mill's process conditions. We work with your process engineers on juice profile review, water chemistry analysis, dosage calculation and program reviews across the campaign, and can provide on-site support where the project requires it. Final specification, dosage and packaging are confirmed after a plant trial on your process.

Innovacorp India Pvt Ltd
2B / BW Shalimar Bagh, Opp. BQ Market, Near DLF Mall
New Delhi - 110088, India
Phone: +91-9312871070

Frequently Asked Questions

Get a Quote for Your Bhutan Sugar Mill

Send us your juice profile, water chemistry, process stages and target outcomes, and our technical team will propose a speciality chemical program that fits your mill. Call +91-9312871070 to speak with our team and request a sample, datasheet or a quote.