When a hotel lobby in Baddi starts showing dull patches, or a factory canteen floor stops coming clean with the usual mop, the problem is rarely the housekeeping team. It is usually the chemical. Innovacorp supplies the R1–R9 housekeeping range to Baddi facilities — floor cleaners, degreasers, glass cleaners, washroom care and disinfectants — with the dilution guidance that facility supervisors actually ask for.

The Real Problem: One Chemical Does Not Fit Every Surface

Walk into any Baddi facility and you will see the same pattern. Marble in the reception, epoxy in the shop floor, stainless steel in the canteen, ceramic in the washroom. Each surface reacts differently. A strong alkaline degreaser that works well on a canteen floor will dull polished marble within weeks. An acid descaler that clears washroom lime scale will pit chrome fittings if left too long. This is why a graded range — R1 to R9 — makes more sense than a single multipurpose bottle. Each grade is built around one job, one surface, one dilution.

How Baddi Facilities Use the R1-R9 Range

Most of our Baddi customers run a mix of the following, depending on their facility type:

• Floor care (R1, R3): Neutral R1 for daily mopping of marble, tile and epoxy; R3 degreaser for canteen and workshop floors where oil films build up.
• General surfaces (R2): Multipurpose cleaning for walls, doors, partitions and furniture.
• Glass and metal (R4, R9): R4 for glass partitions and stainless fixtures; R9 polish for brass and chrome.
• Washroom care (R5, R6, R7): R5 acid descaler for fixtures; R6 surface disinfectant for high-touch areas; R7 hand wash for washroom and kitchen use.
• Ambience (R8): Air freshener for lobbies, corridors and washrooms.

Who We Supply in Baddi

The R1–R9 range goes to a fairly wide set of Baddi facilities. Hotels and banquet halls use it for guest-facing areas where presentation matters. Corporate offices use it for daily floor and glass maintenance. Factory admin teams use R3 and R6 for canteens and change rooms. Clinics and diagnostic centres use R6 for waiting areas and washrooms, with the caveat that clinical areas with specific validation needs are handled separately. Facility management companies running multi-site contracts in Baddi typically order a consolidated mix across the range.

What the Range Covers

Grade	Product	Typical Use	pH (as supplied)
R1	Neutral Floor Cleaner	Marble, tile, epoxy — daily mopping	6 – 8
R2	Multipurpose Cleaner	Walls, doors, partitions, furniture	7 – 9
R3	Floor Degreaser	Kitchen, canteen, workshop floors	10 – 12
R4	Glass Cleaner	Windows, glass partitions, steel fixtures	7 – 9
R5	Toilet Bowl Cleaner	Washroom fixtures, lime scale removal	1 – 3
R6	Surface Disinfectant	Washrooms, high-touch surfaces, canteens	6 – 8
R7	Hand Wash	Washrooms, kitchens, staff areas	5 – 7
R8	Air Freshener	Lobbies, corridors, washrooms	Neutral
R9	Metal Polish	Brass, chrome, stainless steel	6 – 8

These are typical values. Actual figures are on the TDS of each grade — share your surface types and we will send the matching TDS.

Dilution — What Actually Works on the Floor

Dilution is where most housekeeping budgets leak. Over-diluting leaves soil behind and the team mops twice. Under-diluting wastes chemical and can damage the surface. As a working guide for Baddi facilities:

• R1 Floor Cleaner: 1:40 for routine mopping; 1:20 where footfall is heavy or floors are visibly soiled.
• R2 Multipurpose: 1:20 for surfaces; use a spray bottle for touch-ups rather than a full bucket.
• R3 Degreaser: 1:10 for canteen and workshop floors; pre-spray on heavy grease patches, dwell 5 minutes, then scrub.
• R5 Toilet Bowl Cleaner: Apply neat on fixtures, dwell 5–10 minutes, rinse. Do not mix with other cleaners.
• R6 Surface Disinfectant: 1:20 for washroom and high-touch surfaces; follow the label dwell time before wiping.

The right dilution for your facility depends on water hardness, surface type and soil load. The product label gives the starting ratio; the routine is adjusted based on how the surface responds.

Packing Options

We pack the R1–R9 range in sizes that match how Baddi facilities actually consume:

• 5 L cans — for smaller offices, clinics and single-site contracts
• 20 L cans — the most common size for hotels and mid-size offices
• 50 L cans — for factory admin blocks and multi-floor offices
• 200 L drums — for facility management companies running multiple Baddi sites

What Facility Teams Get From Us

• Grade-level clarity: Each product has a defined job — no ambiguity about which bottle goes on which surface.
• Dilution discipline: Labels and supervisor cards that help the team mix consistently, batch after batch.
• Surface safety: Neutral grades for polished stone and epoxy; acid grades only where descaling is needed.
• Scrubber compatibility: Formulations that work with the mop buckets, spray bottles and floor scrubbers your team already uses.

Support for Baddi Facilities

If a floor is filming, a washroom is holding odour, or a disinfectant is not giving the dwell time your routine needs, call us — we will look at the routine with you and suggest a fix. The product label and the TDS give the starting dilution and application method; the adjustment comes from understanding how your facility actually cleans.

Frequently Asked Questions

What products are included in Innovacorp's R1-R9 housekeeping chemical range supplied in Baddi?

Our R1-R9 range includes multipurpose cleaners, floor degreasers, glass cleaners, toilet bowl cleaners, surface disinfectants, hand wash, and air fresheners. Each grade is formulated for a specific cleaning task in hotels, offices, hospitals and industrial facilities in Baddi.

How is the dilution ratio decided for a Baddi facility's cleaning routine?

Dilution depends on the surface type, the soil load, and the cleaning method. A neutral floor cleaner for daily mopping is typically diluted more than a degreaser for a canteen floor. The product label gives the starting ratio, and the routine is adjusted based on how the surface responds.

Are housekeeping chemicals suitable for pharma cleanrooms in Baddi?

Housekeeping chemicals are designed for general facility cleaning in commercial and industrial spaces. Pharma cleanrooms have specific validation and documentation requirements that go beyond general housekeeping. The suitability of a product for a cleanroom depends on the facility's validation protocol, not on a general product category.

What should a facility check before switching to a graded housekeeping chemical range?

The first step is to list the surfaces in the facility — marble, epoxy, stainless steel, ceramic, glass — and match each surface to the appropriate grade. The second step is to review the current dilution practice and the cleaning team's routine. A graded range works when the team understands which product goes on which surface, not just that the product is stronger.

Call +91-9312871070 to discuss your facility's surfaces and request a grade selection guide.